Painting skirting boards can be tricky when you have carpets.
Best masking tape for painting skirting boards.
How to mask up before painting and how to use masking tape to prepare a room when decorating or varnishing so as to protect carpets windows light switches units glass in window frames etc.
2 find the end of the masking tape and use the roll as a guide holding the tape tight against the skirting board.
Wood primer undercoat if you are painting directly to wood only.
Place the cut straight edge in one corner of the room with the cut straight edge up against the skirting board of one wall and the roll next to the skirting.
It works in much the same way as masking tape putting a block between the paint brush and the surface where you don t want paint.
For protecting your carpet when painting skirting boards you ll need to use 2 at least masking tape.
Using a paint shield.
Rid the skirting board of any dust and loose paint by brushing with a soft brush.
Leave the masking tape down if re applying a coat if you notice that you are going to need multiple coats that s usually the case to get the best finish possible.
Use a pair of scissors to cut your masking tape so you have a straight edge.
The trick is to mask up the carpet so that you do not get any paint on the carpets.
Then take your putty knife and press it down in the space between the skirting board and the carpet pushing the tape down and leaving the skirting board fully exposed.
3 start in a corner and pull out to the end.
For a really smart finish you should apply masking tape to the edge of the floor.
Gloss paint or satin paint the choice is up to you.
Paint the skirting boards once you have the masking tape down you can safely paint around the room avoiding any paint reaching the carpet for the best finish possible.
Masking up with masking tape how to prepare a room for painting or decorating with masking tape.
You can also clean with soap and water to ensure the surface is fully prepped for painting.
So if you re painting the top edge of the skirting board you ll apply masking tape to the wall where it joins the skirting.
1 first of all you must have a good quality masking tape with a width of 2 no thinner.
We will be advising on the best type of paint for your skirting board shortly.